SDI Riva Self-Cure - GIC A2 (Expiry-Nov 2026)

Product Description Riva Self Cure range is the ideal radiopaque, self curing conventional glass ionomer restorative materials. With excellent tooth adhesion, fluoride release and high compressive strength, available in two viscosities, Riva Self Cure range is useful for a wide range of restorative applications.IndicationsNon stress bearing Class I and II restorations.Deciduous teeth restorationsGeriatric restorationsIntermediate restorative and base material for Class I and II cavities using the sandwich techniqueCervical (Class V) restorationsCore build upsTemporary fillingsRestorative in the field using the ART technique.Dentine replacementCONTRA-INDICATIONSPulp cappingProduct may cause skin irritations to some people. In such cases, discontinue use and seek medical attention.SpecificationLong term strength for bulk fills superior wear resistance:370MPaSuperior wear resistance: 99µmSuperior Long term fluoride release: 3.01µg/cm2Long term acid resistance: 0.07mmHigh radiopacity: 290�aturesIdeal for minimally invasive dentistryRiva Self Cure is the ideal restorative material for use in minimally invasive dentistry (MID) as it is a bioactive material which prevents caries from occurring. Natural tooth structure is preserved, so large cavities and undercuts are not necessary.Great marginal adaptationRiva Self Cure is the answer to long term microleakage prevention. Use it as a restorative or a base under permanent restorations. “....self-cured glass ionomer bases were more effective in reducing microleakage in both the occlusal and proximal cavo surfaces than a fl owable resin.Bioactive proprietary technologyRiva Self Cure utilizes SDI’s proprietary ionglass™ fi ller developed by our glass technologists. Ionglass™ is a radiopaque, high ion releasing, bioactive glass used in SDI’s range of glass ionomer products. Riva Self Cure releases substantially higher fl uoride to assist with remineralization of the natural dentitionBulk fill to save timeRiva Self Cure can be bulk fi lled to minimize chairside time.The strongest dentin replacementWhen dentin is missing, use Riva Self Cure to replace it. It is the best dental material available today that virtually mimics dentin. No adhesive is required, and sensitivity is nonexistent. Like dentin, Riva Self Cure has a very high compressive strength, ensuring it will withstand long-term mastication forces.BPA and HEMA FreeRiva Self Cure does not contain Bisphenol A (including it’s derivatives) or HEMA. Use this product on your patients with confidence and peace of mindChoice of viscositiesRiva Self Cure easily extrudes into the cavity, but for an exceptional packable, high viscosity material, use Riva Self Cure HV. You have a choiceSurface hardnessThe greater the surface hardness, the greater the resistance to abrasive wear. Riva Self Cure is a dynamic glass ionomer restorative material that can withstand high penetration of the surface.Low acid erosionRiva Self Cure has a very low acid erosion value. This improves the longevity of the restoration, resisting disintegration and wear caused by oral acidity. The ISO Standard dictates that a material cannot have acid erosion of more than 0.17mm.DirectionsA. CAVITY PREPARATION:1. Clean and isolate tooth.Note: A conservative cavity should be prepared, employing standard techniques and instruments. Undercuts are not necessary2. In cases where pulp protection is necessary, use a calcium hydroxide linerB. CONDITIONING / ETCHING:1. Apply Riva Conditioner to the prepared surfaces and leave in cavity for 10 seconds2. Rinse thoroughly with water3. Remove excess water. Keep moist. Avoid contamination.IMPORTANT: Be careful not to completely dry the surface. Surface should be glisteningC. PROCEDURE FOR MIXING AND PLACINGCAPSULE SYSTEM:1 Push the plunger on a hard surface until it flush with the body of the capsule. Important: Do not click with an applicator before you mix2. Immediately place activated capsule into the Ultramat 2 amalgamator or any high speed capsule mixer (4000 – 4800 rpm)3. Mix for 10 secondsNOTE: The working time can be extended by decreasing the mixing time by no more than 3 seconds (i.e. minimum mixing time is 7 seconds)4. Immediately remove the capsule and place into the Riva capsule applicator5. Click the trigger of the Riva capsule applicator until glass ionomer paste is seen through the clear nozzle6. Extrude Riva Self Cure into the cavity, being careful not to trap air under the restoration.NOTE: Temperatures higher than 23±1˚C will shorten the working time specified in the above table7. At the end of the working time, apply Riva Coat to all exposed surfaces of restoration8. Light cure for 10 seconds.POWDER / LIQUID SYSTEM (REGULAR SET ONLY)1. Gently tap Riva Self Cure powder bottle on the hand. Using the plastic scoop provided, dispense one level measure of powder onto the mixing pad2. Carefully dispense the recommended number of drops of Riva Self Cure Liquid next to the powder on the mixing pad. Replace cap tightly3. Use a plastic spatula and divide the powder into two equal parts4. Mix the liquid with one part of the powder for 10 seconds and then include the second part and continue mixing for another 15 to 20 seconds5. Place mixed paste into the cavity, being careful not to trap air under or within the restoration. At 23ºC / 74ºF, the working time will be about two minutes6. At the end of the working time, apply Riva Coat to all exposed surfaces of restoration7. Light cure for 10 secondsD. FINISHING:1. Finish the restoration using standard techniques, after the specified finishing time2. Apply another layer of Riva Coat3. Light cure for 10 seconds4. Instruct patient not to eat for at least one hour after procedure.PackagingSdi Riva Self Cure GIC Powder & Liquid A2:1 x 6.9mL (8g) Riva Self Cure Liquid bottle1 x 15g Riva Self Cure Powder jar